20
USING THE SYSTEM RESET FUNCTION
Use the SYSTEM RESET function in the following cases:
• When the battery is replaced
• When you want to delete the memory
• When the display becomes unrecognizable
1. Press the SYSTEM RESET Button on the back of
the main unit with a thin stick that is not
easily breakable.
All the data stored in the memory and the set data
(time, weight, and stride length) are deleted.
2. Set the time, weight, and stride
length again.
After all characters on the display are turned on,
the initial time setting display appears.
(Begin on page 11, Setting the Time.)
HJ-112ES-IM.qxd 8/21/06 10:29 AM Page 20
To Next Page
Loading...
