10
BATTERY INSTALLATION
5. Tighten the screw on the battery cover.
NOTES:
• The time setting display will appear
on the screen for approximately 5
minutes after the battery is inserted.
• After installing the battery,
set time of day, weight and stride length.
When the battery is removed from the unit the settings and all data
stored in the memory will be erased.
Be sure to write important memory data in a notebook.
Battery Indicator
NOTE:
When the battery indicator starts to blink, the unit stops
counting, the value of the latest number of steps is turned on,
and the time is displayed as ''_:_ _''.
When the battery indicator is blinking, press the MODE
button to display the data for the current day. Press the
MEMORY/
▲ button to view the data stored in the memory.
When the Battery Indicator appears on the display screen remove
the old battery.
Take the battery out with a thin stick that is not easily breakable.
• DO NOT use a pair of metal tweezers
or a screwdriver.
• Replace with a new CR2032 battery.
BATTERY REPLACEMENT
HJ-112ES-IM.qxd 8/21/06 10:29 AM Page 10
To Next Page
Loading...
Need help?
General
