How to fix a blank display on my Omron HJ-329 Pedometer?
If nothing is displayed on your Omron Pedometer, it could be due to a few reasons. First, the battery saving mode may be active; press any button to exit it. Second, the battery might be inserted incorrectly; make sure the polarities (+ and -) are aligned correctly. Finally, the battery may be worn out and needs replacing with a new CR2032 battery.
What to do if my Omron HJ-329 displays incorrect values?
If your Omron Pedometer is showing incorrect values, it might be positioned incorrectly. Also, double check your settings to make sure they are correct.
Why is the low battery indicator blinking on my Omron HJ-329?
If the low battery indicator on your Omron Pedometer is blinking or constantly on, it means the battery is either low or completely worn out. The solution is to replace the old battery with a new CR2032 battery.
What to do if the Omron Pedometer display is unusual or buttons don't work?
If your Omron Pedometer display is unusual or the buttons aren't working correctly, try replacing the battery with a new CR2032 battery. If that doesn't work, reinstall the battery.
General| Type | Pedometer |
|---|---|
| Step Count | Yes |
| Distance Measurement | Yes |
| Calories Burned | Yes |
| Activity Time | Yes |
| Display | LCD |
| Power Source | CR2032 battery |
| Measurement Accuracy | ±5% |
| Water Resistance | No |
| Measurement Range | Up to 99, 999 steps |
| Battery Life | Approximately 6 months |
| Memory | 7-day memory |
Explains the meaning of warning and caution symbols used in the instruction manual.
Provides essential safety guidelines for operating the device, including handling, usage, and disposal.
Configures weight units, personal weight, and time settings for the pedometer.
Sets the preferred units for height and stride length, and configures the stride length value.
Explains the meaning of the low battery indicator and when to replace the battery.
Provides a step-by-step guide on how to safely remove and replace the battery in the pedometer.
Highlights safety precautions for battery replacement, including proper disposal and insertion alignment.
Outlines the procedure to delete all measurement results and device settings.
Lists common issues like no display, incorrect values, and unresponsive buttons with their probable causes and solutions.
To Next Page
