You can use this Mode when you want to adjust the stimulation to your favourite programme.
You can use this Mode in combination with all Automatic Courses.
❇ The Button you have selected will be flashing.
❇ To stop the function you selected, push the Button again.
If you do not like the feel of irritation:
Use the Soft Mode.
The unit provides soft stimulations
without giving the feel of irritation.
If you want to repeatedly use only your favourite stimulation:
Use the Repeat Mode.
The unit repeats your favourite stimulation.
If you want to massage shoulders intensively and fully:
Select the Point Mode.
If you want to massage a wide range of the region such as the waist (lower back):
Select the Wide Mode.
If you want to use different kinds of stimulation for the right and left sides:
Select red or white Button.
Point & Wide Mode, Balance Adjustment (Switching between Red and White Buttons)
The stimulation of each Pad varies.
(For detail use of this Mode, refer to Page 6.)
How to Treat
Treat the region with the
Button
When you want to treat the region according to your symptom and favourite operation by selecting the
massage method from Tapping, Kneading, Pushing, and Rubbing
1. Push the Massage Button.
Each time you push the Massage Button, the massage method
flashes in the order of Tapping, Kneading, Pushing, and Rubbing.
❇ When you use the unit for the first time, the Shoulder light and the
WIDE light will flash. When you use the unit for the second time
and onward, the Button you used in the previous treatment will
flash.
2. Select your favourite massage method according to
your symptom.
The massage type changes automatically as you select it.
❇ The Button you have selected will be flashing.
Treat the region by selecting one course from Relieve, Region, and Massage.
When Tapping is selected
How to use the Special Mode
▼
To Next Page
Loading...
Need help?
General
