You3blood pressure and pulse rate are dis-
played.
4. Press the
START/STOP button to turn
the monitor off.
NOTE: The monitor will automatically
turn off after five minutes.
INSTRUCTIONS FOR SPECIAL CONDITIONS
If your systolic pressure is known to be more than 220 mmHg,
press and hold the START/STOP button until the monitor inflates
30 to 40 mmHg higher than your suspected systolic pressure.
NOTES: • Do not apply more pressure than necessary.
• The monitor will not inflate above 299 mmHg.
TAKING A MEASUREMENT
17
3. When the measurement is complete, the arm
cuff completely deflates. Your blood pressure
and pulse rate are displayed.
Final ES HEM-780 IM 1/28/05 1:11 PM Page 16
To Next Page
Loading...
