To Next PageTo Next PageWhat to do if the scaling display value exceeds 99999 on Omron K3MA-J-A2 100-240VAC?
If the scaling display value exceeds 99999, immediately change the input to a value within the specified range. Also, the scaling value may be inappropriate, so review the scaling value at the initial setting level.
What to do if the scaling display value is lower than -19999 on Omron K3MA-J-A2 100-240VAC?
If the scaling display value is lower than -19999, immediately change the input to a value within the specified range. In addition, the scaling value may be inappropriate, so review the scaling value at the initial setting level.
What to do if I get an input error on my Omron K3MA-J-A2 100-240VAC?
If you encounter an input error, promptly change the input voltage/current to a value that falls within the measurement range. If the error persists, repair is necessary. Consult your OMRON sales representative.
How to fix EEPROM memory error on Omron Measuring Instruments?
If an EEPROM memory error is displayed, press the Level Key for 3 seconds to restore the settings to the factory defaults. If the error persists, repair is necessary. Consult your OMRON sales representative.
What to do when turning ON Omron K3MA-J-A2 100-240VAC for the first time?
When turning on the product for the first time, at the initial setting level, set the input type and other parameters according to your application.
General| Brand | Omron |
|---|---|
| Model | K3MA-J-A2 100-240VAC |
| Category | Measuring Instruments |
| Language | English |
Details the electrical and environmental ratings for the K3MA-J.
Diagram and description of the terminal layout for wiring.
Details the primary operational functions of the K3MA-J.
Details the operational modes for comparative outputs (OUT1 and OUT2).
Describes the function of each key on the front panel.
Provides guidance on using M3 crimp terminals for wiring.
Details operations performed while the meter is running.
Instructions for setting and releasing the forced-zero function.
