To Next PageTo Next PageWhat to do if the scaling display value exceeds 99999 on Omron K3MA-J Measuring Instruments?
If the scaling display value exceeds 99999, immediately change the input to a value within the specified range. Also, the scaling value may be inappropriate, so review the scaling value at the initial setting level.
What to do if the scaling display value is lower than -19999 on Omron K3MA-J Measuring Instruments?
If the scaling display value is lower than -19999, immediately change the input to a value within the specified range. In addition, the scaling value may be inappropriate, so review the scaling value at the initial setting level.
What to do if I get an input error on my Omron K3MA-J Measuring Instruments?
If you encounter an input error, promptly change the input voltage/current to a value that falls within the measurement range. If the error persists, repair is necessary. Consult your OMRON sales representative.
How to fix EEPROM memory error on Omron K3MA-J Measuring Instruments?
If an EEPROM memory error is displayed, press the Level Key for 3 seconds to restore the settings to the factory defaults. If the error persists, repair is necessary. Consult your OMRON sales representative.
What to do when turning ON Omron K3MA-J for the first time?
When turning on the product for the first time, at the initial setting level, set the input type and other parameters according to your application.
General| Input Type | Voltage, Current, Thermocouple, RTD |
|---|---|
| Accuracy | ±0.3% FS ±1 digit |
| Sampling Period | 0.5 s |
| Protection structure | Front panel: IP66 |
| Control Output | Voltage |
| Alarm Output | Relay |
| Mounting | Panel mount |
| Communication | RS-485 |
| Relay Output | 250 VAC, 3 A (resistive load) |
| Power Supply Voltage | 100 to 240 VAC, 50/60 Hz; 24 VAC, 50/60 Hz; 24 VDC |
| Humidity | 35 to 85% RH (non-condensing) |
Highlights the K3MA-J's highly visible dual-color display, user-friendly operation, and robust design for various applications.
Details electrical and environmental ratings, including supply voltage, power consumption, insulation, dielectric strength, noise, vibration, and shock resistance.
Explains how to convert input signals to physical values, including setting decimal points for display.
Details the teaching function for setting scaling parameters using actual input values for easier configuration.
Describes the three output modes: Upper Limit (High Acting), Lower Limit (Low Acting), and Outside Band Acting.
Provides error codes and their corresponding countermeasures for resolving issues.
