K3MA-J
8
Nomenclature
Dimensions
Name Functions
1. Main indicator Displays current values, parameters, and set values.
2. Opera-
tion indica-
tors
1 Lit when output 1 is ON.
2 Lit when output 2 is ON.
SV Lit when a set value is being displayed or changed.
Max Lit when the main indicator is showing the MAX value.
Min Lit when the main indicator is showing the MIN value.
Z Lit during the forced-zero operation.
T Lit when the teaching function is operable. Blinks while the teaching function is operating.
3. Level indicator Displays the current level that the K3MA-J is in. (See below for details.)
4. MAX/MIN Key Used to display the MAX and MIN values when a measurement value is being displayed.
5. Level Key Used to change the level.
6. Mode Key Used to allow the main indicator to indicate parameters sequentially.
7. Shift Key Used to enable a set value to be changed. When changing a set value, this key is used to move along the digits.
8. Up Key Used to change a set value. Used to set or clear a forced-zero function when a measurement value is being displayed.
Level indicator Level
p
Protect
Not lit Operation
s
Initial setting
f
Advanced-function setting
2
1
MAX/MIN LEVEL MODE SHIFT UP
Max
Min
SV
Z
T
2. Operation indicators
3. Level indicator
4. MAX/MIN key
5. Level key
6. Mode key
7. Shift key
8. Up key
1. Main indicator
ABCDE
UPSHIFTMODELEVELMAX/MIN
101.2
91
96
48
1.3
12
97
85
80
44.8
45
+0.5
0
92
+0.5
0
Finger protective
cover (provided)
Main indicator
character size
Panel cut-out
7.6 mm
14.2 mm
75 min.
120 min.
The K3MA-J uses M3 terminals.
Mounting Recommended Panel Thickness
1 to 8 mm.
Mount the product horizontally.
To Next Page
Loading...
Need help?
General
