EasyManua.ls Logo

Omron MicroAIR U100 - Battery Management; Battery Insertion Steps; Battery Life and Replacement; Battery Low Indicator Guide

Omron MicroAIR U100
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Inserting batteries
1. Remove the battery cover on bottom side by pushing on the
release buttons on both sides.
2. Insert the batteries according to the battery polarity indicated
inside the battery compartment.
3. Replace battery cover by pushing buttons on both sides of the
battery cover.
Battery life and battery replacement
The unit can operate with alkaline batteries or with nickel-metal-hydride (NiMH) rechargeable
batteries. Depending on the capacity and condition of the batteries, the unit can operate up to
4 hours on a set of alkaline batteries.
Battery Low Indicator (orange light)
Flashes The batteries are low. Replace both batteries with new ones.
Turns on The batteries are depleted. The device will not nebulize. Immediately
replace both batteries with new ones.
The battery low indicator will turn off if no button is pressed for 10
seconds or if you turn off the device.
Remove batteries if the unit is not in use for long periods. Failure to do
so could result in damage due to battery leakage.
Batteries should be treated as chemical waste; disposal should be done
at your retail store or at appropriate collection locations.
Notes:
How to insert or replace the batteries

Related product manuals