14
1. Insert batteries, see page 12.
2. Align the mark on the medication container with the mark on the main unit. Push down and rotate
the medication container clockwise.
Note: Do not assemble the medication container to the main unit when the mesh cap is installed.
3. Open the medication container by pressing on both sides of the lid.
How to assemble the unit and fill the medication container
Caution:
Clean and disinfect the product’s parts before using the product for the first
time, after the product has not been used for an extended period of time and
when parts are contaminated. (Refer to page 19 for instructions.)
To Next Page
Loading...
