EasyManua.ls Logo

Omron MicroAIR U100 - Cleaning the Mesh Cap; Cleaning Other Parts; Cleaning the Vibrating Element; Cleaning the Main Unit

Omron MicroAIR U100
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
6. Follow the below instructions to clean all parts.
Mesh Cap
Wash the mesh cap in mild (neutral) detergent, then rinse off
with clean water. Remove excess water and allow to air dry in
a clean place.
Some types of medications can easily remain on the mesh,
therefore pay close attention during washing.
Do not wash under running water.
Medication Container, Mouthpiece, Mask and
Mask adapter
Wash them in water and mild (neutral) detergent.
Rinse them thoroughly with clean tap water and allow
to air dry in a clean place.
Vibrating element and its surrounding
Wash with running water.
Note: Make sure the battery cover is installed to
prevent liquid entering the device.
Main Unit
Clean the main unit by wiping it off with a (moistened) lint free cloth.
Use a dry lint free cloth to wipe the main unit dry.
Never clean with benzene or thinner.
How to clean the unit after each inhalation
EN

Related product manuals