12.3. In the Toolbox, right-click below "Target Device" and select "Display EDS Library" as shown below.
12.4. Click "Install" In the EDS Library window, shown below.
12.5. In the Install EDS File window, go to the “C:\ MicroHAWK Auto ID 1.2 EtherNetIP\Omron CJ2\eds” folder
and select the le “MicroHAWK_(35-9000034-11).eds”, as shown below. Click "Open" to load this EDS le.
12.6. You should see that a new item has been added to the EDS Library window called Microscan Systems,
Inc., as indicated by the arrow in the image below. This indicates that the MicroHAWK ID-40 EDS le has
been added to SYSMAC Studio. Click "Close".
19
To Next Page
Loading...
