Omron MicroHAWK ID-40 - Page 22

13.7. In the Tag Set Registration Setting window, conrm all ID-40 input and output tags are checked and click
"Register", as shown below.
13.8. Click the "Connection" button, which is circled below. Click the + button to add the rst EtherNet/IP
device (ID-40).
13.9. Click the "Target Device" dropdown eld and select the rst ID-40 reader, as shown below.
22
Technical Note: MicroHAWK ID-40 360
º
Barcode Reading Solution
TECHNICAL
NOTE