Download the Project to the NA-HMI Panel
18. Download the Project to the NA-HMI Panel
18.1. Click the "Online" button, which is identied in the image below.
• If this is the rst time that you have used the NA-HMI panel, the rmware may need to be
updated. Please go to https://www.youtube.com/watch?v=ETNHvv9KZ38 for a video showing
the rmware update process.
• You may see a warning that that the HMI device has no name. Click “Yes” to continue.
18.2. Once online with the NA-HMI panel, a yellow line will appear under the toolbar. Click the "Synchronize"
button, which is identied in the image below.
18.3. The synchronization page will be displayed as shown below. Verify that the "Store the HMI" option is
checked and click "Transfer to Device".
29
To Next Page
Loading...
