Omron MicroHAWK ID-40 - Configuration 2 - NX1 P2 Controller; Configuration Files

Quantity Part Number Description Version
6 7412-2000-2005 MicroHAWK ID-40, SXGA, HD, Autofocus, WHT, HS, X 1.3.0.3009
6 97-000012-01 Power Supply, 100-240 VAC, +24 VDC, M12 12-Pin Socket
6 61-000163-03 QX Cordset, Host, Ethernet, M12 8-Pin Plug (Screw-On)-to-RJ45, 3 m
6 98-9000054-01 Kit, Mounting, APG, MicroHAWK
1 NX1P2-9024DT1
NX1P2 CPU Unit, 1.5 MB, 32 KB, 4 Single-Axis Position Control, 14
Discrete Input Points, 10 Discrete Output Points (PNP)
1.18
1 HMC-SD291 2 GB Memory Card
1 S8VK-C12024
Single Phase Power Supply, Universal Input (100 to 240 VAC), 120 W
Output (24 VDC @ 5 A)
1 PFP-50N DIN Track - Length: 0.5 m; Height: 7.3 mm
1 NA5-9W001B 9” NA-HMI Panel
1 E3Z-T81 E3Z Through-Beam, Infrared, Pre-Wired
3 XS6W-6LSZH8SS200CM-Y Cat 6A Ethernet cable, 2m, Yellow
1 N/A 16-Port 100 Mbps Ethernet Switch
Conguration Files
• SYSMAC Project le to import for Conguration 1: “6_ID40_NJ301_EIP_with_HMI_revD.smc2”
• SYSMAC Project le to import for Conguration 2: “6_ID40_NX1P2_EIP_with_HMI_revD.smc2”
• WebLink 1.3.0 Conguration le: “360_code_ID40_settings.wls”
Conguration 2 – NX1P2 Controller