4 - 25
4 System Program
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
4-4 System Menu Details
4
4-4-5 NJ/NX/NY Troubleshooter (Project System Menu)
The operation settings of the NJ/NX Troubleshooter are set from the Sysmac Studio. Double-click Trou-
bleshooter under Configurations and Setup in the Multiview Explorer. The Troubleshooter Settings
Tab Page will be displayed in the Edit Pane.
Setting the Display Languages for Errors and Event Logs
The display languages are set in the Language Mapping Area.
Restricting Operation of the Troubleshooter
You can use passwords to restrict the operation of the Troubleshooter for each function.
Operation Settings of the NJ/NX/NY Troubleshooter
No. Item Description
1 Selected Controller Selects the Controller for which to set the languages.
2 HMI Project Language Displays the project language that is set in the HMI.
3 User Event Language Sets the language to use to display user-defined events. Set the cor-
responding languages for the NA project and the Controller project.
No. Item Description
1 Access to Event Logs Select the level to restrict operations to switch to event log screens.
2 Ability to Reset Errors Select the level to restrict operations to reset an errors.
3 Ability to Clear Event Logs Select the level to restrict operations to clear logs.
4 Ability to Save to CSV File Select the level to restrict operations to save the data to CSV files.
5 Ability to Print Screens Select the level to restrict operations to capture screens.
6 Restriction Level Set the levels in the Security Setting Area for the operations to
restrict.
To Next Page
Loading...
