Related Manuals
24
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
Related Manuals
The following manuals are related to the NA-series PTs. Use these manuals for reference.
Manual name Cat. No. Models Applications Description
NA-series Program-
mable Terminal Hard-
ware User’s Manual
V117 NA5-W
Learning the speci-
fications and set-
tings required to
install an NA-series
PT and connect
peripheral devices.
Information is provided on NA-series
PT specifications, part names, instal-
lation procedures, and procedures to
connect an NA Unit to peripheral
devices.
Information is also provided on main-
tenance after operation and trouble-
shooting.
NA-series Program-
mable Terminal Hard-
ware(-V1) User’s
Manual
V125 NA5-W-V1
Learning the speci-
fications and set-
tings required to
install an NA-series
PT and connect
peripheral devices.
Information is provided on NA-series
PT specifications, part names, instal-
lation procedures, and procedures to
connect an NA Unit to peripheral
devices.
Information is also provided on main-
tenance after operation and trouble-
shooting.
NA-series Program-
mable Terminal Soft-
ware User’s Manual
V118 NA5-W(-V1)
Learning about
NA-series PT pages
and object func-
tions.
NA-series PT pages and object func-
tions are described.
NA-series Program-
mable Terminal
Device Connection
User’s Manual
V119 NA5-W(-V1) Learning the speci-
fications required
to connect devices
to an NA-series PT.
Information is provided on connection
procedures and setting procedures to
connect an NA-series PT to a Control-
ler or other device.
NA-series Program-
mable Terminal
Soft-NA User’s Man-
ual
V126 NA-RTLD Learning about the
procedure to install
the Soft-NA and
differences from
the NA5 series.
Information is provided on the specifi-
cations of the Soft-NA and differences
from the NA5 series.
Information is also provided on mainte-
nance after operation and trouble-
shooting.
NA-series Program-
mable Terminal
Startup Guide
V120 NA5-W Learning in con-
crete terms infor-
mation required to
install and start the
operation of an
NA-series PT.
The part names and installation proce-
dures are described followed by page
creation and transfer procedures with
the Sysmac Studio. Also operation,
maintenance, and inspection proce-
dures after the project is transferred
are described. Sample screen cap-
tures are provided as examples.
To Next Page
Loading...
