4 - 39
4 System Program
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
4-4 System Menu Details
4
4-4-11 Safety Monitor
Starting from a User Screen
The required settings are made from the Sysmac Studio.
The following example shows how to use an object event to execute the Safety Monitor.
In this example, settings are made to execute the Safety Monitor when a Button object is pressed.
1 Place a Button object on the screen and display Events and Actions.
2 Select Click as the event.
3 Select StartSafetyMonitor as the action.
To Next Page
Loading...
