Omron NA5-7W001S-V1

27
Related Manuals
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
CS/CJ/NSJ Series
Communications
Commands Refer-
ence Manual
W342 CS1G/H-CPUH
CS1G/H-CPU-V1
CS1D-CPUH
CS1D-CPUS
CS1W-SCU-V1
CS1W-SCB-V1
CJ1G/H-CPUH
CJ1G-CPUP
CJ1M-CPU
CJ1G-CPU
CJ1W-SCU-V1
Learning detailed
specifications on
the communica-
tions instructions
addressed to
CS/CJ-series CPU
Units and
NSJ-series PLCs.
1) C-mode commands and 2) FINS
commands are described in detail.
Refer to this manual for information
on communications commands
(C-mode commands and FINS com-
mands) addressed to CPU Units.
Note This manual describes com-
munications commands that
are addressed to a CPU Unit.
The communications path is
not relevant. (The communi-
cations commands can be
sent through the serial com-
munications port of the CPU
Unit, the communications port
of a Serial Communications
Board/Unit, or a communica-
tions port on another Commu-
nications Unit.)
CJ-series CJ2 CPU
Unit Hardware User’s
Manual
W472 CJ2H-CPU6-EIP
CJ2H-CPU6
CJ2M-CPU
Learning the hard-
ware specifica-
tions of CJ2 CPU
Units.
The following information is provided
on a CJ2 CPU Unit.
• Introduction and features
• Basic system configuration
• Part names and functions
• Installation and setting procedures
• Troubleshooting
Use this manual together with the Soft-
ware User’s Manual (Cat. No. W473).
CJ-series CJ2 CPU
Unit Software User’s
Manual
W473 CJ2H-CPU6-EIP
CJ2H-CPU6
CJ2M-CPU
Learning the soft-
ware specifica-
tions of CJ2 CPU
Units.
The following information is provided
on a CJ2 CPU Unit.
• CPU Unit operation
• Internal memory
• Programming
• Settings
• Functions built into the CPU Unit
Use this manual together with the
Hardware User’s Manual (Cat. No.
W472).
Ethernet Units Oper-
ation Manual Con-
struction of Networks
W420 CS1W-ETN21
CJ1W-ETN21
Learning how to
use an Ethernet
Unit.
Information is provided on the Ether-
net Units.
Information is provided on the basic
setup and FINS communications.
Refer to the Communications Com-
mands Reference Manual (Cat. No.
W342) for details on FINS commands
that can be sent to CS/CJ-series CPU
Units when using the FINS communi-
cations service.
Ethernet Units Oper-
ation Manual Con-
struction of
Applications
W421 CS1W-ETN21
CJ1W-ETN21
Learning how to
use an Ethernet
Unit.
Information is provided on construct-
ing host applications, including func-
tions for sending/receiving mail,
socket service, automatic clock
adjustment, FTP server functions,
and FINS communications.
Manual name Cat. No. Models Applications Description