7 Connecting to LSIS PLCs
7-6
NB-series Programmable Terminals Host Connection Manual (V108)
When Using LS XGT CPU Direct Protocol
PT default communication parameters: 115200bps (Baud Rate), 8 (Data Bit), none (Parity Check), 1
(Stop Bit) and 0 (PLC Station No.)
RS232 Communication
Note LS XGT CPU Direct protocol only supports communication speed of 115200bps and the Multiple Station No.
is not supported.
When Using LS XGT Cnet Protocol
PT default communication parameters: 9600bps (Baud Rate), 8 (Data Bit), none (Parity Check), 1 (Stop
Bit) and 0 (PLC Station No.)
RS232 Communication
RS485 Communication
To Next Page
Loading...
