Omron NB7W-TW**B series User Manual

11 Connecting to Keyence PLCs
11-6
NB-series Programmable Terminals Host Connection Manual (V108)
PLC Setting when using Keyence KV-5000 EtherNetSlave Protocol is shown as below.
1 Double-click the [Ethernet] - [KV-5000] under [Unit Configuration] in KV-STUDIO Software.
2 Open the [Unit Editor] dialog box.
Set the IP address and Port Number (upper link) to the same parameters as the PT setting.
PLC Setting

Omron NB7W-TW**B series Specifications

General

Brand	Omron
Model	NB7W-TW**B series
Category	Touch terminals
Language	English