10
Operating instructions
3. Preparing the nebuliser for use
Warning:
Clean and disinfect the nebuliser kit, mouthpiece and optional nosepiece or
masks before using them for the first time after purchase, if the device has
not been used for a long period of time, or if more than one person uses the
same device.
For directions on cleaning and disinfecting the parts of the device refer to Section 5
in this instruction manual.
Note: Make sure that the air filter is changed regularly. (See Section 7 “Changing
the air filter”.)
1. Make sure that the power switch is turned off.
Check that the power switch is
in the position.
2. Plug the power plug into a power outlet.
3. Remove the mouthpiece and cap from the
nebuliser kit.
4. Remove the inhalation top from the medication
tank.
1) Rotate the inhalation top anti-clockwise.
2) Lift the inhalation top out of the medication
tank.
NE-C28_main.book Page 10 Thursday, February 11, 2010 8:16 AM
To Next Page
Loading...
