Omron NJ Series Firmware Update Instruction

A-1
Formatting SD Memory Cards
Use the SD Memory Card Formatter provided by the SD Association, not the formatting tool provided
with the operating system, when you format an SD Memory Card that was prepared as an SD Memory
Card for firmware update.
Download the SD Memory Card Formatter from the SD Association website.
Appendices
A-2
NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model