Omron NJ Series Troubleshooting Manual

3-77
3 Error Tables
NJ-series Troubleshooting Manual (W503)
3-1 Errors by Source
3
3-1-4 Errors in the EtherNet/IP Function Module
94030000 hex Tag Data Link
Stopped
Tag data links were
stopped by Network
Configurator or
manipulation of a
system-defined
variable. Or, the
data link table was
downloaded from
the Network Config-
urator again.
• Tag data links were stopped by
Network Configurator or manip-
ulation of a system-defined
variable.
S NJ-series
CPU Unit
Built-in Ether-
Net/IP Port
User’s Manual
(Cat. No.
W506)
94040000 hex Tag Data Link
Started
Tag data links were
started by Network
Configurator or
manipulation of a
system-defined
variable. Or, the
data link table was
downloaded from
the Network Config-
urator again.
• Tag data links were started by
Network Configurator or manip-
ulation of a system-defined
variable.
S Same as
above.
94050000 hex Link
Detected
Establishment of an
Ethernet link was
detected.
• Establishment of an Ethernet
link was detected.
S Same as
above.
94060000 hex Restarting
Ethernet Port
The built-in Ether-
Net/IP port was
restarted.
• The built-in EtherNet/IP port
was restarted.
S Same as
above.
94070000 hex Tag Data Link
All Run
Tag data link con-
nections to all
nodes have been
established.
• Tag data link connections to all
target nodes have been estab-
lished.
S Same as
above.
94080000 hex IP Address
Fixed
The correct IP
address has been
determined and
Ethernet communi-
cations can start.
• The correct IP address has
been determined and Ethernet
communications can start.
S Same as
above.
94090000 hex BOOTP Cli-
ent Started
The BOOTP client
started requesting
an IP address.
• The BOOTP client started
requesting an IP address.
S Same as
above.
940A0000 hex FTP Server
Started
The FTP agent
started normally.
• The FTP agent started nor-
mally.
S Same as
above.
940B0000 hex NTP Client
Started
The NTP client
started normally
and a request for
the NTP server to
obtain the time
star
ted.
• The NT
P client started normally
and a request for the NTP
server to obtain the time
started.
S Same as
above.
940C0000 hex SNMP
Started
The SNMP agent
started normally.
• The SNMP agent started nor-
mally.
S Same as
above.
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model