Omron NJ Series Troubleshooting Manual

3 Error Tables
3-12
NJ-series Troubleshooting Manual (W503)
90010000 hex Clock
Changed
The clock time was
changed.
• The clock time was changed. S NJ-series
CPU Unit
Hardware
User’s Manual
(Cat. No.
W500)
NJ-series
CPU Unit Soft-
ware User’s
Manual (Cat.
No. W501)
90020000 hex Time Zone
Changed
The time zone was
changed.
• The time zone was changed. S Same as
above.
90080000 hex Variable
Changed to
TRUE with
Forced
Refreshing
Changing a variable
to TRUE with forced
refreshing was
specified.
• Changing a variable to TRUE
with forced refreshing was
specified by the user.
S Same as
above.
90090000 hex Variable
Changed to
FALSE with
Forced
Refreshing
Changing a variable
to FALSE with
forced refreshing
was specified.
• Changing a variable to FALSE
with forced refreshing was
specified by the user.
S Same as
above.
900A0000 hex All Forced
Refreshing
Cleared
Clearing all forced
refreshing values
was specified.
• Clearing all forced refreshing
values was specified by the
user.
S Same as
above.
900B0000 hex Memory All
Cleared
All of memory was
cleared.
• A user with Administrator rights
cleared all of the memory.
S Same as
above.
900C0000 hex Event Log
Cleared
The event log was
cleared.
• The event log was cleared by
the user.
S Same as
above.
900F0000 hex
(Ver. 1.03)
Automatic
Transfer
Completed
The automatic
transfer was com-
pleted.
• The automatic transfer was
completed.
S Same as
above.
90110000 hex Power
Turned ON
The power supply
was turned ON.
• The power supply was turned
ON.
S Same as
above.
90120000 hex Power Inter-
rupted
The power supply
was interrupted.
• T
he power
supply was inter-
rupted.
S Same as
above.
90130000 hex Operation
Started
Operation was
started.
• A command to start operation
was received.
S Same as
above.
90140000 hex Operation
Stopped
Operation was
stopped.
• A command to stop operation
was received.
S Same as
above.
90150000 hex Reset Exe-
cuted
A reset was exe-
cuted.
• A reset command was
received.
S Same as
above.
90160000 hex User Pro-
gram Execu-
tion ID Write
The user program
execution ID was
set or changed in
the CPU Unit.
• A user with Administrator rights
changed the user program exe-
cution ID that is set in the CPU
Unit.
S Same as
above.
90180000 hex All Controller
Errors
Cleared
All current errors
were cleared.
• The user cleared all current
errors.
S Same as
above.
90190000 hex Forced
Refreshing
Cleared
Clearing a forced
refreshing value
was specified.
• Clearing a forced refreshing
value was specified by the user.
S Same as
above.
901A0000 hex
(Ver. 1.03)
Backup
Started
A backup operation
was started.
• A backup operation was
started.
S Same as
above.
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model