Omron NX-EIC202 - 2 NX- -EIC202 con Nfiguration

ConfigureOmronNX‐EIC202EtherNet/IPCouplerforUsewithRockwellAutomationPLCs 
Page4of16
2 NX‐EIC202Configuration
UsethefollowingproceduretopreparetheUnitforuse.Refertothereferencesectionsfor
detailsontheindicatedsteps.
Step Item Section
1 Installation:InstalltheEDSfileinLogix5000 2.1
2 SetIPaddressusingrotaryswitches 2.2
3 ConfiguretheNX‐EIC202withNXConfigurationusingSysmacStudio 2.3
4 [Optional]SetsoftwareIPaddress/SetNTPserver AppendixA
5 ConfigureEIPconnection 2.4
6 UseNX‐EIC202IOdatainPLCprogram 3