Omron NX701-1720 - Relevant Manuals

Relevant Manuals
The following table provides the relevant manuals for the NX-series CPU Units. Read all of the man-
uals that are relevant to your system configuration and application before you use the NX-series CPU
Unit.
Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac
Studio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.
Purpose of use
Manual
Basic information
NX-series CPU Unit Hardware User’s Manual NX-series NX502 CPU Unit Hardware User’
s Manual
NX-series NX102 CPU Unit Hardware User’
s Manual
NJ/NX-series CPU Unit Software User’
s Manual
NJ/NX-series Instructions Reference Manual NJ/NX-series CPU Unit Motion Control User
’
s Manual
NJ/NX-series Motion Control Instructions Reference Manual NJ/NX-series CPU Unit Built-in EtherCA
T Port User´s Manual
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’
s Manual
NJ/NX-series CPU Unit OPC UA User's Manual NX-series CPU Unit FINS Function User's Manual NJ/NX-series Database Connection CPU Units User's Manual NJ/NX-series T
roubleshooting Manual
Introduction to NX701 Controller
¡
Introduction to NX502 Controller
¡
Introduction to NX102 Controller
¡
Setting devices and hardware
¡ ¡ ¡
Using motion control
¡
Using EtherCAT
¡
Using EtherNet/IP
¡
Software settings
¡
Using motion control
¡
Using EtherCAT
¡
Using EtherNet/IP
¡
Using OPC UA
¡
Using FINS
¡
Using the database connection service
¡
Writing the user program
¡ ¡
Using motion control
¡ ¡
Using EtherCAT
¡
Using EtherNet/IP
¡
Using OPC UA
¡
Using FINS
¡
Using the database connection service
¡
Programming error processing
¡
Relevant Manuals
2
NX-series CPU Unit FINS Function User's Manual (W596)