Need help?Do you have a question about the Omron NX701-1620 and is the answer not in the manual?
General| Model | NX701-1620 |
|---|---|
| Type | CPU Unit |
| Power Supply | 24 VDC |
| Programming Software | Sysmac Studio |
| Operating Temperature | 0 to 55°C |
| Storage Temperature | -25 to 70°C |
| Series | NX Series |
| Digital Inputs | Dependent on I/O modules |
| Digital Outputs | Dependent on I/O modules |
| Communication Ports | Ethernet |
| Humidity | 10% to 90% (non-condensing) |
| Shock Resistance | 147 m/s², 3 times each in X, Y, and Z directions |
| Vibration Resistance | 10 to 57 Hz, 0.075 mm amplitude; 57 to 150 Hz, 9.8 m/s² acceleration |
Specifies the target audience for this manual, requiring knowledge of electrical systems and FA.
Lists the specific CPU Unit models and Sysmac Studio versions covered by this manual.
Details the components of a typical page, including headings, procedures, and icons.
Outlines precautions to ensure the safe usage of the product.
Provides precautions for ensuring proper operation and performance of the product.
Offers extra details to enhance understanding or make operations easier.
Details differences in specifications and functionality based on unit and Sysmac Studio versions.
Defines key terms like "download" and "synchronize" as used in the manual.
Details Omron's warranty terms, limitations, and buyer remedies for product defects.
Limits Omron's liability for damages related to product use or consequential losses.
Discusses suitability of use, programmable products, and critical safety considerations for applications.
Covers performance data, specification changes, and errors/omissions.
Clarifies Omron's non-responsibility for user programming of programmable products.
Explains that presented performance data is a guide and not a warranty.
States that product specifications may change without notice.
Disclaims responsibility for clerical, typographical, or proofreading errors or omissions in the manual.
Refers to hardware manuals for safety precautions and provides contact information for specific models.
Details how NJ/NX-series Controllers comply with EU Directives and installation requirements.
Provides precautions for using NX-series Units in Korea, noting Class A device registration.
Explains compliance with shipbuilding standards, including usage conditions for NK and LR standards.
Informs about third-party software licenses and copyright information availability.
Defines unit versions for hardware/software of Units and EtherCAT slaves.
Describes the two types of versions: unit version and DB Connection Service version.
Details methods for checking unit versions using ID information labels and Sysmac Studio.
Relates supported functions to CPU Unit and Sysmac Studio versions, referring to B-4.
Introduces the DB Connection Service, its overview, and key features.
Details the specifications and system architecture of the DB Connection Service.
Outlines the basic operational flow for using the DB Connection Service.
To Next Page
