Introduction
1
NJ/NX-series Database Connection CPU Units User’s Manual (W527)
Introduction
Thank you for purchasing an NJ/NX-series CPU Unit.
This manual contains information that is necessary to use the Database Connection Service with the
NJ/NX -series CPU Unit. Hereinafter the Database Connection Service is called “DB Connection
Service”. Please read this manual and make sure you understand the functionality and performance
of the NJ-series CPU Unit before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical
systems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.
Applicable Products
This manual covers the following products.
• NX-series Database Connection CPU Units
• NX701-1720
• NX701-1620
• NJ-series Database Connection CPU Units
• NJ501-1520
• NJ501-1420
• NJ501-1320
• NJ501-4320
• NJ101-1020
• NJ101-9020
• Sysmac Studio
• SYSMAC-SE2
NX701-20: Version 1.21 or higher
NJ501-20 or NJ101-20: Version 1.14 or higher
To Next Page
Loading...
Need help?
General
