Omron RC212 - Preparing the Blood Pressure Monitor; Installing the Batteries Correctly

12
2. Preparation
2.1 Installing Batteries
1. Push down the hook of the battery cover
and pull downward.
2. Insert 2 “AAA” alkaline batteries as indicated
in the battery compartment.
3. Close the battery cover.
Note
• When the “ ” symbol flashes on the display, it is recommended you replace
batteries.
• To replace batteries, turn your monitor off and remove all batteries. Then replace
with 2 new alkaline batteries at the same time.
• Replacing batteries will not delete previous readings.
• The supplied batteries may have a shorter life than new batteries.
• Disposal of used batteries should be carried out in accordance with local
regulations.
1
2