19
4. Using Memory Function
Your monitor automatically stores up to 30 readings.
• This monitor can be used by multiple users. When you use memory function with
other users, track (or manage) your own readings appropriately.
4.1 Viewing the Readings Stored in Memory
1. Press the button.
The Memory number appears for one second before the pulse rate is
displayed. The most recent reading set is numbered “1”.
• If there are no readings stored in the memory, the screen to
the right is displayed.
• If the reading is high (refer to sub-section 1.3), the “ ”
symbol appears.
• If the memory is full, the monitor will delete the oldest readings.
2. Press the button repeatedly to scroll through the previous
readings stored in the memory.
To Next Page
Loading...
Need help?
General
