Omron S8VS-06024

1
New Product
Switch Mode Power Supply
S8VS
(15/30/60/90/120/180/240/480-W Models)
Multi-Function Indication Monitor
for Production Site Visualization *
• Status displayed on 3-digit, 7-segment display. *
• Signal output notifications at 90 W or more. *
• Conformity to various safety standards for global
usability.
• Varied coverage with 3-year warranty.
* Models with indication monitor
Model Number Structure
Model Number Legend
Note: Not all combinations are possible. Refer to List of Models in Ordering Information, below.
Note: Estimates can be provided for coatings and other specifications that are not given in the datasheet. Ask your OMRON representative for details.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
!
Refer to Safety Precautions for All Power Supplies and Safety
Precautions on page 32.
Recommended Noise Filter
Noise filter
S8V-NF
For more information, refer to S8V-NF Noise
Filter Data Sheet (Cat. No. T212-E1).
1234 5 6
S8VS- @@@@@@@@-@
1. Power Ratings
015: 15 W
030: 30 W
060: 60 W
090: 90 W
120: 120 W
180: 180 W
240: 240 W
480: 480 W
2. Output voltage
05: 5 V
12: 12 V
24: 24 V
3. Indication monitor
None: Without indication monitor (standard model)
A: With indication monitor (maintenance forecast
monitor)
B: With indication monitor (total run time monitor)
BE: With indication monitor but without alarm output
(total run time monitor)
4. Alarm output
None: Sinking (Emitter COM) *
P: Sourcing (Collector COM)
Note: No alarm output possible with 60-W models.
* Both sinking and sourcing outputs are available for
480-W models.
5. UL Class 2 Output Standards (UL 1310)
None: Does not conform. *
S: Conforms.
* 15-W, 30-W, and 60-W models conform to Class 2
output standards (UL 1310).
Note: The S option is available only for 90-W models.
6. Terminal Block Form
None: Screw terminal block
F: Screwless terminal block
Downloaded from Arrow.com.

Omron S8VS-06024 Specifications

General

Brand	Omron
Model	S8VS-06024
Category	Power Supply
Language	English

Summary

Model Number Structure

Model Number Legend

Explains the components and coding system used to define S8VS model numbers.

Ordering Information and Model Selection

List of Available Models

Comprehensive list of S8VS models categorized by indication monitor type and output.

Standard Models (No Indication)

List of S8VS models without any indication monitor functionality.

Maintenance Forecast Monitor Models

S8VS models equipped with a maintenance forecast monitor for predictive maintenance.

Total Run Time Monitor Models

S8VS models featuring a total run time monitor for tracking operational hours.

S8 VS Specifications

Ratings and Characteristics Overview

Key performance parameters including efficiency, input, and output characteristics.

Input Parameters

Output Parameters

Connections and Block Diagrams

Block Diagrams for 15 W to 480 W Models

Alarm Output Connections

Construction and Nomenclature

15 W and 30 W Model Nomenclature

60 W to 240 W Model Nomenclature

480 W Model Nomenclature

Engineering Data

Derating Curves by Power Rating

Mounting and Overload Protection

Mounting Methods and Guidelines

Instructions for proper mounting of S8VS units to ensure heat dissipation and prevent damage.

Overload Protection Function

Details on the S8VS overload protection, its activation, and automatic reset.

Protection and Timing Features

Overvoltage Protection Mechanism

Explanation of the overvoltage protection circuit and the reset procedure.

Inrush Current, Startup, and Hold Time

Undervoltage Alarm Function

How the undervoltage alarm indicates low output voltage and its associated outputs.

Display and Operating Procedures

Mode Change and Operation Modes

Setting Mode Parameters

Peak Hold Reset and Undervoltage Alarm

Procedures for resetting peak hold current and understanding undervoltage alarm indications.

Self-Diagnostics Function

Error Codes and Troubleshooting

List of diagnostic error codes, their causes, and recommended restoration methods.

Maintenance Forecast Monitor Function

Forecast Indication and Output Logic

How the S8VS indicates maintenance needs and triggers alarm outputs based on forecasts.

Maintenance Forecast Monitor Details

Principle of Capacitor Deterioration Monitoring

Indicated Values vs. Output Set Values

Total Run Time Monitor Function

Accumulated Operating Time Display

Alarm and Output for Run Time

Critical Safety Precautions

General Safety Warnings

Essential safety advice covering electric shock, fire, burns, and product damage.

Wiring and Grounding Safety

Precautions for correct wiring, terminal connection, and proper grounding.

Mounting Safety and Heat Dissipation

Guidelines for safe mounting to ensure adequate heat dissipation and prevent damage.

Installation and Maintenance Checks

Periodic Monitor Function Checks

Overcurrent Protection Indicator

Meaning of the DC ON indicator flashing during overload protection.

Troubleshooting and Operational Notes

Diagnosing No Output Voltage