Omron S8VK-S Series

1
New Product
Switch Mode Power Supply
S8VK-S
(30/60/120/240/480-W Models)
A Perfect Fit for Small Control Panels
Coated PCBs for Better Resistance
to Environment
Easy Wiring by Push-in Plus
Technology
• Operation possible at ambient temperatures from
-40 to 70°C.
• Side-by-side mounting possible (up to 55°C). *1
• DC input supported (90 to 350 VDC).
• Power Boost function at 120% (30/60 and 120 W);
Power Boost function at 150% (240 and 480 W).
• Low-voltage detection output (only for 240 and
480 W).
• Vibration resistance to 5G, and 300-VAC abnormal
input voltage supported for 1 second.
• ANSl/ISA 12.12.01.
• Certification for 3,000 m altitude (UL/EN/IEC
60950-1 and EN 50178).
• Complies with EN/IEC 61558-2-16.
• Lloyd’s, DNV GL (Except 30 W)
• Conforms to SEMI F47-0706.
• RoHS compliant
*1. For front, side-by-side mounting, see page 18.
Model Number Structure
Model Number Legend
Note: Not all combinations are possible. Refer to List of Models in Ordering Information, below.
Ordering Information
Note: For details on normal stock models, contact your nearest OMRON representative.
!
Refer to Safety Precautions for All Power Supplies and Safety
Precautions on page 17.
LR
12
S8VK- S@@@@@
1. Power Ratings
030: 30 W
060: 60 W
120: 120 W
240: 240 W
480: 480 W
2. Output voltage
24: 24 V
Power ratings Rated input voltage Rated output voltage Rated output current Maximum boost current Model number
30 W
100 to 240 VAC
(allowable range:
85 to 264 VAC or
90 to 350 VDC)
24 V 1.3 A 1.56 A S8VK-S03024
60 W 24 V 2.5 A 3 A S8VK-S06024
120 W 24 V 5 A 6 A S8VK-S12024
240 W 24 V 10 A 15 A S8VK-S24024
480 W 24 V 20 A 30 A S8VK-S48024

Omron S8VK-S Series Specifications

General

Brand	Omron
Model	S8VK-S Series
Category	Power Supply
Language	English

Summary

OMRON S8 VK-S Series Power Supplies

Key Product Features

Model Number Structure

Details the components and logic for constructing S8VK-S model numbers.

Ordering Information

Provides a table of available models with power ratings and output specifications.

Specifications, Ratings, Characteristics, and Functions

Detailed Technical Specifications

Comprehensive data on efficiency, input, output, environmental, and reliability parameters.

Standard Compliance and Certifications

Product Certifications and Standards

Connections and Block Diagrams

Circuit Block Diagrams by Model

Circuit Block Diagrams for Higher Wattage Models

Construction and Nomenclature

Engineering Data

Derating Curves by Model and Mounting

Operational Aspects and Protection Features

Overload and Overvoltage Protection

Explains overload and overvoltage protection mechanisms and reset procedures.

Timing Characteristics and Low-Voltage Output

Safety Precautions

Warning and Cautionary Information

Covers hazard indications, safety symbols, and general warnings for safe product use.

Precautions for Safe Use

Installation Environment and Operating Life

Covers safe installation locations, ambient conditions, and factors affecting operating life.

Wire Connection Techniques

Detailed procedures for connecting stranded wires, ferrules, and solid wires to terminals.

Mounting and DIN Rail Installation

Push-In Plus Terminal Block Operations

Wiring Guidelines and Wire Selection

Details on wire selection, connection, and precautions for terminal blocks.

Technical Data and Functions

Power Boost Function Details

Explains the temporary boost current feature, its conditions, and limitations.

Overcurrent Protection Mechanism

Describes the protection against short circuits and continuous overcurrent conditions.

Advanced Operation Modes

Series and Parallel Operation

Operation Scenarios and Troubleshooting

Backup Operation Configuration

No Output Voltage Troubleshooting

Steps to diagnose and resolve issues when no output voltage is present.

Maintenance and Service Life

Preventive Maintenance and Replacement Schedule