Omron S8VM Series

Advanced Industrial Automation
S8VM POWER SUPPLIES
T h e p o w e r s u p p l i e s t h a t a l e r t y o u !
» N e w u l t r a - c o m p a c t h o u s i n g
»
E a sy i n st a l l a t i o n
»
E a r l y - w a r n i n g s y s t e m

Omron S8VM Series Specifications

General

Input Voltage Range	85-264 VAC, 120-370 VDC
Output Voltage	5V, 12V, 15V, 24V, 48V
Output Power	100W, 150W, 300W
Protection	Overcurrent, Overvoltage
Cooling	Convection
Mounting	DIN rail mounting
Safety Standards	UL508, EN50178, EN60950-1
Dimensions	Varies by model (refer to datasheet)
Weight	Varies by model (refer to datasheet)

Summary

Early Warning: Voltage Drop Detection and Diagnosis

Undervoltage Alarm Indications and Troubleshooting

Explains LED indicators (DC LOW1, DC LOW2) for different output voltage drop scenarios.

S8 VM Power Supply Ordering and Selection Guide

Model Selection Guide

Provides a detailed table for selecting models based on configuration, power ratings, voltage, and mounting type.

S8 VM Power Supply Technical Specifications

Ratings and Characteristics

Details electrical and mechanical specifications, including efficiency, input/output, environmental, and safety standards.

S8 VM Engineering Data: Derating Curves and Performance

Derating Curves for Mounting

S8 VM Protection Features: Overload and Overvoltage Safeguards

Overload and Overvoltage Protection

Details overload protection that reduces output voltage and overvoltage protection that shuts off output.

S8 VM Undervoltage Alarm: Indicators and Output Signals

Alarm Indicators and Output Signals

Troubleshooting S8 VM Undervoltage Alarms with LEDs

Interpreting LED Status and Power Supply Diagnosis

Table correlating LED status (DC ON, DC LOW1, DC LOW2) with probable causes and power supply status.

S8 VM Troubleshooting: Common Errors and Solutions

Troubleshooting Methods for Common Errors

Provides troubleshooting steps for common issues like momentary power failure, overload, and deterioration.

Essential S8 VM Safety Precautions and Warnings

General Safety Warnings and Precautions

Covers essential safety warnings including electric shock, burns, fire hazards, and proper handling.

S8 VM Installation: Wiring, Environment, and Connectors

S8 VM Operation: Series Connection and Output Issues

Series Operation and No Output Issues