Omron SEM-1 User Manual

2. Press the MEMORY button again, while
the average reading screen is displayed.
The result from the most recent
measurement is displayed.
The date and time of each measurement is
displayed alternately with the measurement
reading.
3. Press the MEMORY button repeatedly to
cycle through the previous measurement
results.
Keep the button pressed down to cycle
rapidly through the previous results.
4. Press the START/STOP button to turn off the power.
NOTE: If you forget to turn the monitor off, it will automatically shut
itself off after five minutes.
HOW TO USE THE MEMORY FUNCTION
22
Alternating display
EN-02-31[SEM-2]-3 8/23/05 8:58 AM Page 22

Omron SEM-1 Specifications

General

Brand	Omron
Model	SEM-1
Category	Blood Pressure Monitor
Language	English