Omron SS-01GL - User Manual

168
Subminiature Basic Switch SS
Subminiature Basic Switch Offers Long
Life of 30,000,000 Operations
A design that combines simplicity and stability by
the use of two split springs ensures a long service
life of 30,000,000 operations.
A variety of models are available, with operating
force ranging from low to high.
Solder, quick-connect terminals (#110) and PCB
terminals are available.
Approval obtained for standards including UL,
CSA, and VDE.
RCEW
Ordering Information
Model Number Legend
SS-jjjjj
12345
1. Ratings
10: 10.1 A at 125 VAC
5: 5 A at 125 VAC
01: 0.1 A at 30 VDC
2. Actuator
None: Pin plunger
GL: Hinge lever
GL13: Simulated roller lever
GL2: Hinge roller lever
3. Maximum Operating Force (see note 1)
None: 1.47 N {150 gf}
-F: 0.49 N {50 gf} (0.1 A, 5 A)
-E: 0.25 N {25 gf} (0.1 A)
4. Contact Form
None: SPDT
-2: SPST-NC
-3: SPST-NO
5. Terminals
None: Solder terminals
T: Quick-connect terminals (#110)
D: PCB terminals (see note 2)
Note: 1. These values are for the pin plunger models.
2. The PCB terminals has a right-angle terminal option.
D1: Left-angled terminals
D2: Right-angled terminals
3. When suffix “-T” is placed after the model number, the
model withstands high temperatures (–25°C to 120°C).
Contact Form
SPDT
SPST-NC
SPST-NO

Omron SS-01GL Specifications

General

Category	Switch
Contact Configuration/Form	SPDT
Vibration Resistance	10 to 55Hz, 1.5mm double amplitude
Life Expectancy - Electrically	100, 000 operations min.
Degree of Protection	IP40
Operating Speed	0.5 mm/s to 1 m/s
Insulation Resistance	100 MΩ min. (at 500 VDC)
Shock Resistance	1, 000 m/s²
Life Expectancy - Mechanically	1, 000, 000 operations min.
Operating Temperature	-25°C to +85°C