Omron SYSMAC Series - C120-LK201-V1 Specific Settings; C120-LK202-V1 Specific Settings

11
① C120-LK201-V1
Switc
h
Setting Item
Set Switch Status
1~2
CTS Setting
CTS Always ON
External CTS
1
ON
OFF
2
OFF
ON
3~6
Sync. Type
Internal Sync.
External Sync.
3
ON
OFF
4
OFF
ON
5
ON
OFF
6
OFF
ON
7
Not Used
8
Not Used
② C120-LK202-V1
Switch
Setting Item
Set Switch Status
1~2
Terminator
Exist
None
1
ON
ON
2
OFF
OFF
3
ON
OFF
4
OFF
OFF
5
ON
OFF
6
OFF
OFF
7
Not Used
8
Not Used
Recommended Settings are Internal Sync., Terminator, CTS OV .
During communication, Mode of PLC must be „MONITOR‟. Otherwise,
„Write‟ to PLC is not available.
If Data Memory(DM6600) is set to 0101h, PLC Mode is ‘MONITOR’.
DM6600 is available to be changed in only ‘PROGRAM’ mode.
REF.
Caution