Electromagnetic Inductive RFID System V640 for Semiconductor Industry 1
Electromagnetic Inductive RFID System
V640 for Semiconductor Industry
Enables reading and writing
transponders for various Semiconductor
applications, such as FOUPs (Front-
Opening Unified Pods), reticles, and
pods.
• Conforms to Carrier Reader/Writer-related SEMI stan-
dards; SEMI E99, E4, and E5.
• Antenna dimensions conform to SEMI E15.1.
• Reads/writes data embedded in a 32-mm Glass Multipage
Transponder (RI-TRP-DR2B/-WR2B).
• Noise measurement function for detecting proper place-
ment of Antenna.
• Shielded antenna reduces influence of surrounding metal.
• Lineup incudes compact models designed for long-range
communications.
• CE marking/FCC approvals
System Configuration
■ Standard Models
V640-HS61
V640-HAM11-V2
V700-L22
CIDRW Head
Amplifier Unit
ID Tag
CIDRW Controller
RS-485 host device
via ASCII protocol
RS-232C host device
via SECS I/II protocol
RS-232C host device
via dedicated 1:1
protocol
RI-TRP-DR2B
RI-TRP-WR2B
(32-mm Glass
Transponder)
Texas
Instruments
RS-232C host device
via ASCII protocol
V640.fm Page 1 Wednesday, September 13, 2006 4:21 PM
To Next Page
Need help?
General
