Omron V700-HMD13 series - Page 68

66
Section 5
5.2 How to set up parameters
V700-L21
User's Manual
Section 5
Setup Mode
[Parameter check example]
➀
Select a parameter output being altered.
➁
The contents of the current parameter settings will be displayed.
SETUP_START <L21 ><XXX.XX,YYY.YY>
::GET_PARAM [ENTER] * [ENTER] does not appear on
the screen.
SETUP_START <L21 ><XXX.XX,YYY.YY>
::GET_PARAM
S_BAUD=19200
S_DEVID=1
S_T1=0.5
S_T2=10.0
S_T3=45
S_T4=3
S_RTY=3
S_MS=M
S_SRC=0
S_BNO=0
C_BAUD=9600
C_HEAD=0
::END
_