Omron Z - Characteristics; Durability

General-purpose Basic Switch Z F-165
Limit
Switches
■ Characteristics
Note: 1. The values are for the plunger models. (For the lever models, the values are at the plunger section.) (Contract your OMRON represen-
tative for other models.)
2. The values are for the Z-15G pin plunger.
3. The values are for the Z-10FY-B.
4. The values are for the pin plunger. The durability for models other than the pin plunger is 10,000,000 min.
5. Malfunction: 1 ms max.
Item Basic
(except micro load
and flexible rod)/
maintained
contact
Z-15
Basic
(micro load)
Z-01H
Basic
(flexible rod)
Z-15
Split-contact
Z-10F
Operating speed
(see note)
0.01 mm to 1 m/s (see note 1) 1 mm to 1 m/s 0.1 mm to 1 m/s (see note 1)
Operating frequency Mechanical: 240 operations/min
Electrical: 20 operations/min
Mechanical: 120 operations/min
Electrical: 20 operations/min
Mechanical: 240 operations/min
Electrical: 20 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 15 mΩ max. (initial
value)
50 mΩ max. (initial
value)
15 mΩ max. (initial value) 25 mΩ max. (initial value)
Dielectric strength Between contacts of same polarity
Contact gap G: 1,000 VAC, 50/60 Hz for
1min
Contact gap H: 600 VAC, 50/60 Hz for
1min
Contact gap E: 1,500 VAC, 50/60 Hz for
1min
Between current-carrying metal parts and
ground, and between each terminal and
non-current-carrying metal parts
2,000 VAC, 50/60 Hz for 1 min
Between contacts of same polarity
Contact gap G: 1,000 VAC, 50/
60 Hz for 1 min
Contact gap H: 600 VAC, 50/ 60 Hz
for 1 min
Between current-carrying metal
parts and ground, and between each
terminal and non-current-carrying
metal parts
2,000 VAC, 50/60 Hz for 1 min
Between contacts of same polarity
Contact gap F: 1,500 VAC, 50/
60 Hz for 1 min
Between current-carrying metal
parts and ground, and between each
terminal and non-current-carrying
metal parts
2,000 VAC, 50/60 Hz for 1 min
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double
amplitude (see note 5)
Malfunction: 10 to 20 Hz, 1.5-mm
double amplitude (see note 5)
Malfunction: 10 to 55 Hz, 1.5-mm
double amplitude (see note 5)
Shock resistance
Destruction
: 1,000 m/s
2
{approx. 100G} max.
Malfunction
: 300 m/s
2
{approx. 30G} max.
(see note 2, 5)
Destruction
: 1,000 m/s
2
{approx.
100G} max.
Malfunction
:50 m/s
2
{approx. 5G} max.
(see note 5)
Destruction
: 1,000 m/s
2
{approx.
100G} max.
Malfunction
: 300 m/s
2
.
{approx. 30G} max.
(see note 3, 5)
Durability Mechanical
:
Contact gap G, H: 20,000,000 operations
min. (see note 4)
Contact gap E: 300,000 operations
Electrical
:
Contact gap G, H: 500,000 operations
min.
Contact gap E: 100,000 operations
min.
Mechanical
: 1,000,000 operations
min.
Electrical
: 100,000 operations
min.
Mechanical
: 500,000 operations
min. (see note 1)
Electrical
: 100,000 operations
min.
Degree of protection General-purpose: IP00
Drip-proof: IP62
Degree of protection
against electric shock
Class I
Proof tracking index
(PTI)
175
Switch category D (IEC335-1)
Ambient temperature Operating:
General-purpose: −25°C to 80°C (with no icing)
Drip-proof: −15°C to 80°C (with no icing)
Ambient humidity Operating:
General-purpose: 35% to 85%
Drip-proof: 35% to 95%
Weight Approx. 22 to 58 g Approx. 42 to 48 g Approx. 34 to 61 g