Programmable Relay ZEN 13
Display Screen and Basic Operations
The display screen for the LCD-type CPU Units and the operations of the buttons are shown below
.
Operation Button Names and Operations
Button Function
Menus Writing ladder program Setting parameters Button switch
(See page 9)
DEL --- Deletes inputs, outputs, connection lines,
and blank lines.
--- B6 ON
ALT --- Switches between normally open and nor-
mally closed conditions.
Changes to connection line write mode.
Inserts a line.
--- B7 ON
Up Moves the cursor up
and down.
Moves the cursor up and down.
Selects bit types and functions.
Moves the cursor up and down.
Changes numerals and param-
eters.
B5 ON
Down B2 ON
Left --- Moves the cursor right and left. Moves the cursor right and left. B3 ON
Right B4 ON
ESC Returns to the previous
screen.
Cancels the setting and returns to the previ-
ous operation.
Cancels the setting and returns
to the previous operation.
B0 ON
OK Selects the menu item
at the cursor position.
Confirms the setting. Confirms the setting. B1 ON
LCD
ALT ButtonDEL Button
Cursor
Buttons
ESC Button OK Button
Icon Meanings
Icon Meaning
RUN Displayed while in RUN mode.
ERR Indicates an error.
▲ Displayed when there is a
higher-level menu or ladder pro-
gram line than the one currently
displayed.
▼ Displayed when there is a lower-
level menu or ladder program
line than the one currently dis-
played.
Displayed when a password has
been set.
RUN ERR
▲ ▼
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
To Next Page
Loading...
