• Because even seemingly matte materials may produce harmful reflected beams, care should always
be taken to control the beam path and to keep others from observing the machine during operation.
• Because of its high-voltage and other potentially dangerous components, your laser engraver should
only be disassembled or repaired by trained professionals.
• This laser engraver is designed to use 220V 50Hz AC electricity. It should never be used with any
other form of power supply or used when the power supply is unsteady or unreliable. Always
make sure the machine is well grounded before operating.
The Manufacturer does not take any responsibility or assume any liability because of improper use and
the User is obliged to obey all of the above safety guidelines, as well as any applicable local
rules or regulations.
Disclaimer
Your engraver may differ somewhat from those shown in this manual due to options, updates etc.
Please contact us if your engraver came with an outdated manual or if you have any other ques-
tions.
3
To Next Page
Loading...
Need help?
General