Onan BGE - Page 9

X
19.75
(501.6)
I
so sa. HOLE
(127) 2 PLACES
NOTES.
CONVENTIONAL COMPARTMENT MOUNT BGE-BGEL
WlTH END-MOUNTED MUFFLER
CUT-OUT
FOR COOLING
1. DIMENSIONS INCLUDE 0.6 INCH (15 mm)
AIR DISCHARGE MINIMUM CLEARANCE REQUIRED
BETWEENSETANDiNSUWTlON
OR COM-
PARTMENT WALLS.
IMUM SHOWN. ALLOW EXTM SPACE AT
OIL FILL SIDES AND EQUALLY ON
BOTH
ENDS.
3. ALLOW MINIMUM OF 0.6 INCH (15 mm)
CLEARANCE BETWEEN TOP OF SET AND
ING. MlNiMUM HEIGHT- 14.60 INCHES(371
mm).
.
2. IF COMPARTMENTIS LARGERMAN MIN-
INSULATION
OR COMPASTMENT CEIL-
4. DIMEF.!SIDNS ( ]ARE IN MILUMETRES.
5. SWARE HOLES (5.5il/127) ARE SUITABLE
FOR
USE OF 38 IWCH CASE MU.
.JOBDRAIN HOLE
(127) 2 PLACES
FIGURE 3. COMPARTMENT FLOOR PLAN .
7
Redistribution or publication of this document, 
by any means, is strictly prohibited.