OneAccess ONE100 - Ethernet Switch Interface (SWITCH)

ONE100 - Installation Manual
26
4.4 Ethernet Switch Interface (SWITCH)
4.4.1 Characteristics
The switch Ethernet function offers 4 ports Ethernet. Every port can be switched
and/or routed.
• 10/100 Mbits/s,
• Half or full duplex,
• Auto-negotiation,
• Auto MDI/MDIX.
4.4.2 Meaning of LED Colors
Green LED Lit Link active
Blinking yellow LED Traffic in progress
4.4.3 Connector Pinout
RJ45 Connector:
Pin Signal Pin Signal
1
TD (+)
5 NC
2 TD (-) 6 RD (-)
3 RD (+) 7 NC
4 NC 8 NC
4.4.4 Cables
The cables are shielded, crossover/straight cables with 4 twisted pairs. The switch
supports autodetection of crossover/straight cable (’auto-MDI/MDI-X detection’); the
transmission pairs are (1-2) and receive pairs are (3-6).