ONE100 - Installation Manual
15
3.3 Rear Panel
This section details the various types of ONE100 rear panel so that the user can
identify the interface type and port numbering. It should be noted that only the fully-
loaded configurations are represented. Other configurations can be derived by not
providing some interfaces represented on the product.
3.3.1 Configuration with 4 ISDN
The interface marking is indicated in bold and between bracket.
All the connectors are located on the rear panel:
• 1 ADSL 2/2 + access (RJ11) (ADSL)
• 1 console port (RJ45) (CONSOLE),
• 4 Ethernet ports (RJ45) (SWITCH – E0-0/0 - E3-0/3),
• 0 to 4 ISDN access S0/T0 (RJ45) (ISDN BRI – L0-5/0 - L3-5/3),
• 2 connectors for WLAN antenna,
• Input for the external power supply connector (DC input jack, 12V-1, 7A).
Figure 2. Rear panel with 4 BRI configuration
Depending of the ordered configuration of the system, the rear panel may
change.
To Next Page
Loading...
