OneAccess ONE100 - Page 16

ONE100 - Installation Manual
16
3.3.2 Configuration with FXS/FXO/PSTN board
The interface marking is indicated in bold and between bracket.
All the connectors are located on the rear panel:
• 1 ADSL 2/2+ access (RJ11) (ADSL),
• 1 console port (RJ45) (CONSOLE),
• 1 optional LAN 100 Mbps (RJ45) (ETHERNET),
• 4 Ethernet ports (RJ45) (SWITCH – E0-0/0 - E3-0/3),
• 4 analog telephone interfaces to connect telephones (FXS interface) (RJ45),
(FXS – L0-5/0 – L3-5/3),
• 1 analog telephone access to connect telephone line (FXO interface) (RJ45),
(FXO – L4-5/4),
• 1 modem access PSTN (RJ45) (PSTN),
• 2 V.28 interface (V.28 – S0 - S1),
• 2 connectors for WLAN antenna,
• Input for the external power supply connector (DC input jack, 12V-1, 7A).
Figure 3. Rear panel with FXS/FXO/PSTN configuration
Depending of the ordered configuration of the system, the rear panel may
change.