ONE100 - Installation Manual
17
3.3.3 Configuration with 8 FXS/1 FXO
The interface marking is indicated in bold and between bracket.
All the connectors are located on the rear panel:
• 1 ADSL 2/2 + access (RJ11) (ADSL),
• 1 console port (RJ45) (CONSOLE),
• Optional, 1 LAN 100 Mbps access (RJ45) (ETHERNET),
• 4 communication ports (RJ45) marked (SWITCH – E0-0/0 - E3-0/3),
• 8 analog telephone accesses to connect telephone (FXS interface) (RJ45),
marked (FXS – L0-5/0 – L7-5/7),
• 1 analog telephone access to connect telephone line (FXO interface) (RJ45),
marked (FXO – L8-5/8),
• 2 connectors for WLAN antenna,
• Input for the external power supply connector (DC input jack, 12V-1, 7A).
Figure 4. Rear panel with 8 FXS, 1 FXO configuration
Depending of the ordered configuration of the system, the rear panel may
change.
To Next Page
Loading...
