OneAccess ONE100D/M - Safety Compliance; Over-Voltage and Over-Current Protection Compliance; EMC Compliance; Environmental Compliance

ONE100D/M Chapter 2
Installation Guide Directives and standards
15
2.3 Safety compliance
• EN60950-1 - 1st edition: Safety of information technology equipment, including electrical business
equipment.
• Class 1 equipment for Table Tops with 115/230 Vac internal power supply.
• Class 3 equipment for …
- Table Tops with 115/230 Vac external power supply adapter
- Table Tops with -48 Vdc internal power supply
- Card Versions.
2.4 Over-voltage and over-current protection compliance
The over-voltage and over-current protection complies with ITU-T K.44 and ETSI ETS 300 386-2 recom-
mendations.
2.5 EMC compliance
• EN55022 B Emissions
• EN55024 Immunity
• EN61000-3-2 Harmonics
• EN61000-3-3 Voltage fluctuations and flicker
• EN61000-4-2 ESD
• EN61000-4-3 Radiated immunity
• EN61000-4-4 EFT/burst
• EN61000-4-5 Surge
• EN61000-4-6 Conducted immunity
• EN61000-4-8 Power magnetic field immunity
• EN61000-4-11 Voltage dips & drops
• ENV50204 Radiated immunity against digital radio telephone
• EN300386 V.1.3.3 Ems Requirements
2.6 Environmental compliance
• Storage conditions: ETSI ETS 300 019-1-1 Class 1.1. In addition, the storage temperature has to be
between -25 to +70°C
• Transport conditions: ETSI ETS 300 019-1-2 Class 2.3
• Stationary use conditions: ETSI ETS 300 019-1-3 Class 3.2. In addition, a relative humidity between
0 to 95% non-condensing and an ambient operational temperature between -10 to 50°C is supported.
• Maximum altitude: 3000m
• International protection (IP) class of protection against solid and liquids: IP40
• In use: Temperature Controlled.
- Test specification (Part1 Classification of environmental conditions):
› Class T3.1 (normal)
› Class T3.1 (exceptional)