ONE100D/M Chapter 3
Installation Guide Router description
22
3.4.1 Introducing the front panel LEDs
When all the connections are made and the ONE100D/M is powered, the LEDs on the front panel reflect
the actual status of the device.
The following figure shows the front panel LED indicators of the ONE100D/M:
LED states
One front panel LED can reflect different status modes by the way it lights up. The front panel LEDs can
light up as follows:
LED state LED duty cycle Description
OFF 0 % The LED never lights up.
ON 100 % The LED lights up continuously.
blinking 50 % The LED is as much lit as it is out.
flashing 75 % The LED lights up during 75% of the time, i.e. 1,5 seconds ON
and 0,5 seconds OFF.
To Next Page
Loading...
