ONE300 – Installation Manual
24
5 Installation
Always unplug the power AC cable before any hardware maintenance
operation.
This chapter describes assembling/disassembling operations for optional modules.
The user should be aware that the router software auto-detects on-board modules
and interfaces.
All vacant slots of the rear panel must be obstructed with suitable face-
plates in order to guarantee the respect of the EMC standards as defined in
Chapter 7. Directives and Standard
5.1 Opening the Chassis
1 Unlock the 2 screws located on each side of the cover,
2 Remove the cover.
To Next Page
Loading...
